99d28a29-758d-4a80-839a-ed649a677382Laminate Flammex - Egger (A1-A3)double- belt pressingsingle producer, at plant1350 kg/m3SystemsPaints and chemical preparationsThis data set contains the results for the modules A1-A3 according to EN 15804. It includes the preparation of the precursor materials through to raw material extraction and processing, their transport to the factory and the production itself, including the provision of all supplies and materials, energy, and the complete waste treatment or the residual waste during the stage of production.
A comparison with other products is only allowed by a similar application in the building. In principle, a comparison or evaluation of EPD data is only possible if all the datasets are created to be compared to EN 15804 and the product-specific features are considered.0Fritz EGGER GmbH & Co. OG
Holzwerkstoffe
Weiberndorf 20
6380 St. Johann Tirol
AustriaForeground system:
EGGER laminate Flammex is a decorative laminate based on hardenable resins (high- pressure laminates). This laminate consists of cellulose fibers (paper) impregnated with thermosetting resins. It is constructed multi- layer and consists of several melamine- resin- impregnated decor papers and one or several Natron Kraft papers which are pressed together under high pressure and temperature. The material can be seen as flame- retardant according to /EN438:2005/. It fulfills the requirements of the construction material class B1 according to /DIN 4102-1: 1998-05/ and the French fire behavior class M1 according to /NF P92-501/. The laminate structure, the material quality, the surface structure, the usage of special overlays and the pressing parameters determine the laminate quality and the application area.
EGGER laminates are always produced continuously. Double- belt presses enable the endless production of different laminate thicknesses with different qualities. This procedure is generally called CPL (Continuous Pressed Laminates). Depending on the pressure during production, EGGER laminates are produced according to /EN 438-9:2010/. The laminates consist of layers of cellulose fiber sheets (commonly paper) impregnated with hardenable resins. The surface layer equipped with decorative colors or patterns is impregnated with melamine resins. The core layers are impregnated with phenolic resins. Increasing temperature and pressure leads to a flux and a hardening of the resins. By crosslinking the resins which is reinforced by the cellulose fibres of the paper, a very dense material with a closed surface is formed.
The laminates are packed and delivered on wooden pallets. Other packaging materials are wood, PE foil and PET tapes. The packaging materials can be thermally treated after usage.
Because the laminates are composite materials in most cases, reprocessing is usually not possible. The material can be incinerated in special plants to generate electricity and thermal energy (according to " AbfallschlĆ¼ssel nach /europƤischem Abfallkatalog/:170201/03")
Background system:
Electricity: Electricity is modelled according to the individual country-specific situations. The country-specific modelling is achieved on multiple levels. Firstly, individual energy carrier specific power plants and plants for renewable energy sources are modelled according to the current national electricity grid mix. Modelling the electricity consumption mix includes transmission / distribution losses and the own use by energy producers (own consumption of power plants and "other" own consumption e.g. due to pumped storage hydro power etc.), as well as imported electricity. Secondly, the national emission and efficiency standards of the power plants are modelled as well as the share of electricity plants and combined heat and power plants (CHP). Thirdly, the country-specific energy carrier supply (share of imports and / or domestic supply) including the country-specific energy carrier properties (e.g. element and energy content) are accounted for. Fourthly, the exploration, mining/production, processing and transport processes of the energy carrier supply chains are modelled according to the specific situation of each electricity producing country. The different production and processing techniques (emissions and efficiencies) in the different energy producing countries are considered, e.g. different crude oil production technologies or different flaring rates at the oil platforms.
Thermal energy, process steam: The thermal energy and process steam supply is modelled according to the individual country-specific situation with regard to emission standards and considered energy carriers. The thermal energy and process steam are produced at heat plants. Efficiencies for thermal energy production are by definition 100% in relation to the corresponding energy carrier input. For process steam the efficiency ranges from 85%, 90% to 95%. The energy carriers used for the generation of thermal energy and process steam are modelled according to the specific import situation (see electricity above).
Transports: All relevant and known transport processes are included. Ocean-going and inland ship transport as well as rail, truck and pipeline transport of bulk commodities are considered.
Energy carriers: The energy carriers are modelled according to the specific supply situation (see electricity above).
Refinery products: Diesel fuel, gasoline, technical gases, fuel oils, lubricants and residues such as bitumen are modelled with a parameterised country-specific refinery model. The refinery model represents the current national standard in refining techniques (e.g. emission level, internal energy consumption, etc.) as well as the individual country-specific product output spectrum, which can be quite different from country to country. The supply of crude oil is modelled, again, according to the country-specific situation with the respective properties of the resources.The laminates are used for interior applications where fire protection is required, e.g. for coating doors and separating wallsLCI resultAttributionalNoneAllocation - market valueAllocation - net calorific valueAllocation - exergetic contentAllocation - massOtherForeground system: Due to different kinds of laminates produced in the plant, allocation by laminate area was applied. For waste incineration, allocation by net calorific value was applied.
Background system: For the combined heat and power production, allocation by exergetic content is applied. For the electricity generation and by-products, e.g. gypsum, allocation by market value is applied due to no common physical properties. Within the refinery allocation by net calorific value and mass is used. For the combined crude oil, natural gas and natural gas liquids production allocation by net calorific value is applied.
For details please see the document "GaBi Databases Modelling Principles"Foreground system: none
Background system: All data used in the calculation of the LCI results refer to net calorific value.NoneGaBi Modelling PrinciplesGaBi Water Modelling PrinciplesGaBi Energy Modelling PrinciplesGaBi Refinery Modelling PrinciplesGaBi Agriculture Model DocumentationGaBi Land Use Change Model DocumentationCut-off rules for each unit process: Coverage of at least 95 % of mass and energy of the input and output flows, and 98 % of their environmental relevance (according to expert judgement).
For further details please see the document "GaBi Databases Modelling Principles"NoneLCI modelling is fully consistent. For details please see the document "GaBi Databases Modelling Principles"NoneFor details please see the document "GaBi Databases Modelling Principles"NoneGaBi databasesUMWELT-PRODUKTDEKLARATION: EGGER Schichtstoff Flammex95.0Not applicableAdjustNoneA1-A3: The environmental profile includes expenses for the life cycle stages cradle-to-gate (module A1-A3). The production of the packaging has been taken into account within the modules A1-A3.No statementPrimary energy from non renewable resources (gross cal. value)Primary energy from non renewable resources (net cal. value)Primary energy from renewable resources (gross cal. value)Primary energy from renewable resources (net cal. value)Primary energy demand from ren. and non ren. resources (net cal. value)Primary energy demand from ren. and non ren. resources (gross cal. value)TRACI 2.1, Ecotoxicity (recommended)TRACI 2.1, Human toxicity, cancer (recommended)TRACI 2.1, Human toxicity, non-canc. (recommended)TRACI 2.1, Global Warming Air, excl. biogenic carbonTRACI 2.1, Resources, Fossil fuelsTRACI 2.1, Human Health Particulate AirUSEtox, Ecotoxicity (recommended)USEtox, Human toxicity, cancer (recommended)TRACI 2.1, Ozone Depletion AirTRACI 2.1, Smog AirUSEtox, Human toxicity, non-canc. (recommended)Total freshwater consumption (including rainwater)Blue water consumptionBlue water useTotal freshwater useResource depletion water, midpoint (v1.06)Resource depletion, mineral, fossils and renewables, midpoint (v1.06)Climate change midpoint, incl biogenic carbon (v1.06)Particulate matter/Respiratory inorganics midpoint (v1.06)Acidification midpoint (v1.06)Eutrophication terrestrial midpoint (v1.06)Climate change midpoint, excl biogenic carbon (v1.06)ReCiPe 1.08 Endpoint (H) - Agricultural land occupationReCiPe 1.08 Endpoint (H) - Climate change Ecosystems, default, excl biogenic carbonReCiPe 1.08 Endpoint (H) - Climate change Human Health, default, excl biogenic carbonReCiPe 1.08 Endpoint (H) - Fossil depletionReCiPe 1.08 Endpoint (H) - Freshwater ecotoxicityReCiPe 1.08 Endpoint (H) - Freshwater eutrophicationReCiPe 1.08 Endpoint (H) - Human toxicityReCiPe 1.08 Endpoint (H) - Ionising radiationReCiPe 1.08 Endpoint (H) - Marine ecotoxicityReCiPe 1.08 Endpoint (H) - Metal depletionReCiPe 1.08 Endpoint (I) - Natural land transformationReCiPe 1.08 Endpoint (H) - Ozone depletionReCiPe 1.08 Endpoint (H) - Particulate matter formationReCiPe 1.08 Endpoint (H) - Photochemical oxidant formationReCiPe 1.08 Endpoint (H) - Terrestrial acidificationReCiPe 1.08 Endpoint (H) - Terrestrial ecotoxicityReCiPe 1.08 Endpoint (H) - Urban land occupationReCiPe 1.08 Midpoint (H) - Agricultural land occupationReCiPe 1.08 Midpoint (H) - Climate change, default, excl biogenic carbonReCiPe 1.08 Midpoint (H) - Fossil depletionReCiPe 1.08 Midpoint (H) - Freshwater ecotoxicityReCiPe 1.08 Midpoint (H) - Freshwater eutrophicationReCiPe 1.08 Midpoint (H) - Human toxicityReCiPe 1.08 Midpoint (H) - Ionising radiationReCiPe 1.08 Midpoint (H) - Marine ecotoxicityReCiPe 1.08 Midpoint (H) - Marine eutrophicationReCiPe 1.08 Midpoint (H) - Metal depletionReCiPe 1.08 Midpoint (H) - Natural land transformationReCiPe 1.08 Midpoint (I) - Ozone depletionReCiPe 1.08 Midpoint (H) - Particulate matter formationReCiPe 1.08 Midpoint (H) - Photochemical oxidant formationReCiPe 1.08 Midpoint (H) - Terrestrial acidificationReCiPe 1.08 Midpoint (H) - Terrestrial ecotoxicityReCiPe 1.08 Midpoint (H) - Urban land occupationReCiPe 1.08 Midpoint (H) - Water depletionReCiPe 1.08 Midpoint (I) - Climate change, default, excl biogenic carbonReCiPe 1.08 Midpoint (E) - Climate change, default, excl biogenic carbonReCiPe 1.08 Endpoint (I) - Climate change Ecosystems, default, excl biogenic carbonReCiPe 1.08 Endpoint (I) - Climate change Human Health, default, excl biogenic carbonReCiPe 1.08 Endpoint (E) - Climate change Ecosystems, default, excl biogenic carbonReCiPe 1.08 Endpoint (E) - Climate change Human Health, default, excl biogenic carbonReCiPe 1.08 Endpoint (I) - Freshwater eutrophicationReCiPe 1.08 Midpoint (I) - Freshwater eutrophicationReCiPe 1.08 Endpoint (E) - Freshwater eutrophicationReCiPe 1.08 Midpoint (E) - Freshwater eutrophicationReCiPe 1.08 Midpoint (E) - Marine eutrophicationReCiPe 1.08 Midpoint (I) - Marine eutrophicationReCiPe 1.08 Endpoint (I) - Ozone depletionReCiPe 1.08 Midpoint (H) - Ozone depletionReCiPe 1.08 Endpoint (E) - Ozone depletionReCiPe 1.08 Midpoint (E) - Ozone depletionReCiPe 1.08 Endpoint (I) - Terrestrial acidificationReCiPe 1.08 Midpoint (I) - Terrestrial acidificationReCiPe 1.08 Endpoint (E) - Terrestrial acidificationReCiPe 1.08 Midpoint (E) - Terrestrial acidificationReCiPe 1.08 Endpoint (I) - Photochemical oxidant formationReCiPe 1.08 Midpoint (I) - Photochemical oxidant formationReCiPe 1.08 Endpoint (E) - Photochemical oxidant formationReCiPe 1.08 Midpoint (E) - Photochemical oxidant formationReCiPe 1.08 Endpoint (I) - Particulate matter formationReCiPe 1.08 Midpoint (I) - Particulate matter formationReCiPe 1.08 Endpoint (E) - Particulate matter formationReCiPe 1.08 Midpoint (E) - Particulate matter formationReCiPe 1.08 Endpoint (I) - Ionising radiationReCiPe 1.08 Midpoint (I) - Ionising radiationReCiPe 1.08 Endpoint (E) - Ionising radiationReCiPe 1.08 Midpoint (E) - Ionising radiationReCiPe 1.08 Endpoint (I) - Agricultural land occupationReCiPe 1.08 Endpoint (I) - Urban land occupationReCiPe 1.08 Midpoint (I) - Agricultural land occupationReCiPe 1.08 Midpoint (I) - Urban land occupationReCiPe 1.08 Endpoint (E) - Agricultural land occupationReCiPe 1.08 Endpoint (E) - Urban land occupationReCiPe 1.08 Midpoint (E) - Agricultural land occupationReCiPe 1.08 Midpoint (E) - Urban land occupationReCiPe 1.08 Endpoint (H) - Natural land transformationReCiPe 1.08 Midpoint (I) - Natural land transformationReCiPe 1.08 Endpoint (E) - Natural land transformationReCiPe 1.08 Midpoint (E) - Natural land transformationReCiPe 1.08 Endpoint (I) - Fossil depletionReCiPe 1.08 Midpoint (E) - Fossil depletionReCiPe 1.08 Endpoint (E) - Fossil depletionReCiPe 1.08 Midpoint (I) - Fossil depletionReCiPe 1.08 Endpoint (I) - Metal depletionReCiPe 1.08 Midpoint (I) - Metal depletionReCiPe 1.08 Endpoint (E) - Metal depletionReCiPe 1.08 Midpoint (E) - Metal depletionReCiPe 1.08 Midpoint (E) - Water depletionReCiPe 1.08 Midpoint (I) - Water depletionReCiPe 1.08 Endpoint (I) - Freshwater ecotoxicityReCiPe 1.08 Endpoint (I) - Human toxicityReCiPe 1.08 Endpoint (I) - Marine ecotoxicityReCiPe 1.08 Endpoint (I) - Terrestrial ecotoxicityReCiPe 1.08 Midpoint (I) - Freshwater ecotoxicityReCiPe 1.08 Midpoint (I) - Human toxicityReCiPe 1.08 Midpoint (I) - Marine ecotoxicityReCiPe 1.08 Midpoint (I) - Terrestrial ecotoxicityReCiPe 1.08 Midpoint (E) - Terrestrial ecotoxicityReCiPe 1.08 Midpoint (E) - Marine ecotoxicityReCiPe 1.08 Midpoint (E) - Human toxicityReCiPe 1.08 Midpoint (E) - Freshwater ecotoxicityReCiPe 1.08 Endpoint (E) - Terrestrial ecotoxicityReCiPe 1.08 Endpoint (E) - Marine ecotoxicityReCiPe 1.08 Endpoint (E) - Human toxicityReCiPe 1.08 Endpoint (E) - Freshwater ecotoxicityAnthropogenic Abiotic Depletion Potential (AADP), TU BerlinReCiPe 1.08 Midpoint (H) - Climate change, incl biogenic carbonReCiPe 1.08 Endpoint (H) - Climate change Ecosystems, incl biogenic carbonReCiPe 1.08 Endpoint (H) - Climate change Human Health, incl biogenic carbonReCiPe 1.08 Endpoint (E) - Climate change Ecosystems, incl biogenic carbonReCiPe 1.08 Endpoint (E) - Climate change Human Health, incl biogenic carbonReCiPe 1.08 Midpoint (E) - Climate change, incl biogenic carbonReCiPe 1.08 Endpoint (I) - Climate change Ecosystems, incl biogenic carbonReCiPe 1.08 Endpoint (I) - Climate change Human Health, incl biogenic carbonReCiPe 1.08 Midpoint (I) - Climate change, incl biogenic carbonTRACI 2.1, Global Warming Air, incl. biogenic carbonTRACI 2.1, AcidificationTRACI 2.1, EutrophicationEutrophication freshwater midpoint (v1.06)Ionizing radiation midpoint, human health (v1.06)Eutrophication marine midpoint (v1.06)Ozone depletion midpoint (v1.06)Photochemical ozone formation midpoint, human health (v1.06)Ecotoxicity freshwater midpoint (v1.06)Human toxicity midpoint, cancer effects (v1.06)Human toxicity midpoint, non-cancer effects (v1.06)UBP 2013, Global warmingUBP 2013, Pesticides into soilUBP 2013, Radioactive waste to depositUBP 2013, Radioactive substances into airUBP 2013, Water resourcesUBP 2013, Energy resourcesUBP 2013, Water pollutantsUBP 2013, Heavy metals into soilUBP 2013, Mineral resourcesUBP 2013, POP into waterUBP 2013, Radioactive substances into waterUBP 2013, Carcinogenic substances into airUBP 2013, Heavy metals into airUBP 2013, Land useUBP 2013, Heavy metals into waterUBP 2013, Main air pollutantsUBP 2013, Ozone layer depletionUBP 2013, Non radioactive waste to depositReCiPe 1.08 Endpoint (E) - Climate change Ecosystems, incl biog. C, incl LUC, no norm/weightReCiPe 1.08 Endpoint (E) - Climate change Human Health, incl biog. C, incl LUC, no norm/weightReCiPe 1.08 Midpoint (E) - Climate change, incl biog. C, incl LUC, no norm/weightReCiPe 1.08 Endpoint (H) - Climate change Ecosystems, incl biog. C, incl LUC, no norm/weightReCiPe 1.08 Endpoint (H) - Climate change Human Health, incl biog. C, incl LUC, no norm/weightReCiPe 1.08 Midpoint (H) - Climate change, incl biog. C, incl LUC, no norm/weightReCiPe 1.08 Endpoint (I) - Climate change Ecosystems, incl biog. C, incl LUC, no norm/weightReCiPe 1.08 Endpoint (I) - Climate change Human Health, incl biog. C, incl LUC, no norm/weightReCiPe 1.08 Midpoint (I) - Climate change, incl biog. C, incl LUC, no norm/weightTRACI 2.1, Global Warming Air, incl biogenic carbon, incl LUC, no norm/weightIPCC AR5 GWP20, incl biogenic carbonIPCC AR5 GWP100, incl biogenic carbonIPCC AR5 GTP50, incl biogenic carbonIPCC AR5 GTP20, incl biogenic carbonIPCC AR5 GTP100, incl biogenic carbonIPCC AR5 GTP100, incl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GTP20, incl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GTP50, incl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GWP100, incl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GWP20, incl biogenic carbon, incl Land Use Change, no norm/weightReCiPe 1.08 Midpoint (E) - Climate change, excl biog. C, incl LUC, no norm/weightReCiPe 1.08 Endpoint (I) - Climate change Human Health, excl biog. C, incl LUC, no norm/weightReCiPe 1.08 Endpoint (H) - Climate change Ecosystems, excl biog. C, incl LUC, no norm/weightReCiPe 1.08 Midpoint (I) - Climate change, excl biog. C, incl LUC, no norm/weightTRACI 2.1, Global Warming Air, excl biogenic carbon, incl LUC, no norm/weightUBP 2013, Global warming, incl Land Use ChangeIPCC AR5 GWP100, excl biogenic carbon, incl Land Use Change, no norm/weightReCiPe 1.08 Endpoint (H) - Climate change Human Health, excl biog. C, incl LUC, no norm/weightReCiPe 1.08 Endpoint (E) - Climate change Ecosystems, excl biog. C, incl LUC, no norm/weightReCiPe 1.08 Midpoint (H) - Climate change, excl biog. C, incl LUC, no norm/weightIPCC AR5 GWP20, excl biogenic carbonIPCC AR5 GWP20, excl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GTP100, excl biogenic carbon, incl Land Use Change, no norm/weightReCiPe 1.08 Endpoint (E) - Climate change Human Health, excl biog. C, incl LUC, no norm/weightReCiPe 1.08 Endpoint (I) - Climate change Ecosystems, excl biog. C, incl LUC, no norm/weightIPCC AR5 GWP100, excl biogenic carbonIPCC AR5 GTP50, excl biogenic carbonIPCC AR5 GTP20, excl biogenic carbonIPCC AR5 GTP100, excl biogenic carbonIPCC AR5 GTP20, excl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GTP50, excl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GTP20, incl biogenic carbon, Land Use Change only, no norm/weightReCiPe 1.08 Endpoint (I) - Climate change Human Health, LUC only, no norm/weightReCiPe 1.08 Midpoint (I) - Climate change, LUC only, no norm/weightReCiPe 1.08 Midpoint (H) - Climate change, LUC only, no norm/weightIPCC AR5 GWP20, excl biogenic carbon, Land Use Change only, no norm/weightUBP 2013, Global warming, Land Use Change onlyReCiPe 1.08 Endpoint (E) - Climate change Ecosystems, LUC only, no norm/weightReCiPe 1.08 Endpoint (E) - Climate change Human Health, LUC only, no norm/weightReCiPe 1.08 Midpoint (E) - Climate change, LUC only, no norm/weightReCiPe 1.08 Endpoint (H) - Climate change Ecosystems, LUC only, no norm/weightReCiPe 1.08 Endpoint (H) - Climate change Human Health, LUC only, no norm/weightReCiPe 1.08 Endpoint (I) - Climate change Ecosystems, LUC only, no norm/weightTRACI 2.1, Global Warming Air, LUC only, no norm/weightIPCC AR5 GWP100, excl biogenic carbon, Land Use Change only, no norm/weightIPCC AR5 GTP50, excl biogenic carbon, Land Use Change only, no norm/weightIPCC AR5 GTP20, excl biogenic carbon, Land Use Change only, no norm/weightIPCC AR5 GTP100, excl biogenic carbon, Land Use Change only, no norm/weightIPCC AR5 GWP20, incl biogenic carbon, Land Use Change only, no norm/weightIPCC AR5 GWP100, incl biogenic carbon, Land Use Change only, no norm/weightIPCC AR5 GTP50, incl biogenic carbon, Land Use Change only, no norm/weightIPCC AR5 GTP100, incl biogenic carbon, Land Use Change only, no norm/weightCML2001 - Apr. 2015, Photochem. Ozone Creation Potential (POCP)CML2001 - Apr. 2015, Global Warming Potential (GWP 100), Land Use Change only, no norm/weightCML2001 - Apr. 2015, Eutrophication Potential (EP)CML2001 - Apr. 2015, Freshwater Aquatic Ecotoxicity Pot. (FAETP inf.)CML2001 - Apr. 2015, Acidification Potential (AP)CML2001 - Apr. 2015, Marine Aquatic Ecotoxicity Pot. (MAETP inf.)CML2001 - Apr. 2015, Global Warming Potential (GWP 100), excl bio. C, incl LUC, no norm/weightCML2001 - Apr. 2015, Ozone Layer Depletion Potential (ODP, steady state)CML2001 - Apr. 2015, Global Warming Potential (GWP 100), incl bio. C, incl LUC, no norm/weightCML2001 - Apr. 2015, Terrestric Ecotoxicity Potential (TETP inf.)CML2001 - Apr. 2015, Human Toxicity Potential (HTP inf.)CML2001 - Apr. 2015, Global Warming Potential (GWP 100 years)CML2001 - Apr. 2015, Global Warming Potential (GWP 100 years), excl biogenic carbonCML2001 - Apr. 2015, Abiotic Depletion (ADP elements)CML2001 - Apr. 2015, Abiotic Depletion (ADP fossil)The LCI method applied is in compliance with ISO 14040, 14044 and EN15804. The documentation includes all relevant information in view of the data quality and scope of the application of the respective LCI result / data set. The dataset represents the state-of-the-art in view of the referenced functional unit.
Sphera Solutions GmbHOverall quality according to different validation schemes
GaBi = 1,3 interpreted into "very good overall quality" in the GaBi quality validation schemeThe EPD has been verified by an independent reviewer, who was organized by the IBU.IBUGaBi conformity systemFully compliantFully compliantFully compliantFully compliantFully compliantNot definedThis background LCI data set can be used for any types of LCA studies.Sphera Solutions GmbH2021-02-01T00:00:00.000ILCD format 1.1Sphera Solutions GmbHNo official approval by producer or operator2021-02-01T00:00:00.00000.00.001Data set finalised; entirely publishedtrueOtherThe EPD owner has agreed to add LCI information corresponding to the EPD to the GaBi databases. The data set can be used free of charge by anybody to perform LCA studies with GaBi software and databases. Any use of the LCI data outside of the GaBi software and databases should not be considered before having received any written permission from Sphera. GaBi (source code, database including extension databases modules and single data sets, documentation) remains property of Sphera Solutions GmbH. Sphera Solutions GmbH delivers GaBi licenses comprising data storage medium and manual as ordered by the customer. The license guarantees the right of use for one installation of GaBi. Further installations using the same license are not permitted. Additional licenses are only valid if the licensee holds at least one main license. Licenses are not transferable and must only be used within the licensee's organisation. Data sets may be copied for internal use. The number of copies is restricted to the number of licenses of the software system GaBi the licensee owns. The right of use is exclusively valid for the licensee. All rights reserved.Laminate FlammexOutput1.079995691.079995690.000Mixed primary / secondaryUnknown derivationvaluable